4 Stage Value 150GPD Water Saver RO/DI System

Makes up to 150 Gallons of RODI Water Per Day!

BRS 4 Stage Systems are perfect for reefers who have water treated with chlorine or relatively clean well water. Self-contained on a single bracket making them ideal for tight spaces or where a non-permanent connection may be required. Every BRS RODI system can be installed within minutes with the easy to use Mur-lok push-connect fittings that allow you to make leak-free connections. 

 

4 Stage Value Water Saver RO/DI Features:

• Produce 0 TDS water
• Minimal waste water
• Multiple source water connections
• Mur-lok Push Connect dual EPDM O-Ring fittings
• 10 Ft Each of 1/4″ Blue, Red and Black Tubing
• Pre-installed NSF Certified Filters

 

All Bulk Reef Supply RO/DI Systems are covered by our Limited Lifetime Warranty.

 

Bulk Reef Supply RO/DI systems only use the latest filters and components in Reverse Osmosis technology. We have designed our RO/DI units especially for reef tanks, but they can produce perfect water for other types of saltwater and freshwater aquariums too. If you have a well, or you are connected to city water we offer a variety of RO/DI systems that will fit your aquarium’s needs.

 

4 Stage RO/DI Systems – Perfect for city water that is treated with low amounts of chlorine, or well water with very minimal contaminants. Four stage RODI systems are a great solution if you only connect your RODI system temporarily or have little space to dedicate to storing a RODI system.
5 Stage RO/DI Systems – Our most popular systems handle common impurities found in well water along with most types of city water treated with chlorine including small amounts of chloramines.
6 Stage RO/DI Systems – If you are not sure what is in your water, or it contains excessive amounts of TDS or hard to remove contaminants like chloramines, phosphates, nitrates, silicates, etc. The BRS 6 Stage systems are designed to effectively treat any water your home may have prior to using it in your aquarium. The Dual DI stage helps with the hard to remove ions like ammonia, phosphates, silicates, etc.

 

4 Stages of Filtration

Stage 1

Purtrex 5 Micron Depth Sediment Filter

Sediment filters trap debris and other free-floating particles that would normally clog expensive carbon blocks and foul membranes. Purtrex filters are a true depth filter with a graded density that progressively gets tighter through as water passes through the filter allowing them to last longer than the competitors.

Stage 2

BRS 5 Micron VOC Block (Chlorine 15,000 @ 1 GPM)

Our VOC carbon blocks are specially formulated to remove and reduce chlorine and volatile organic compounds from household water.

Stage 3

Dual 75 GPD Dow Filmtec Membrane  (up to 99% rejection rate*)

1.5:1 Waste to Product Water Ratio

DOW is hands down the industry leader for residential RO membranes and when using two membranes, the output can be doubled without the need for any additional waste water over a single membrane. The 100 GPD Filmtec membrane can remove up to 99% of contaminants from traditional household drinking water. All membranes do require pressure to operate correctly, and DOW membranes in a water saver configuration require 65 PSI of feed pressure to operate efficiently. For more info on DOW membranes – Click Here

 

Stage 4

Nuclear Grade Color-Changing Deionization Resin

Deionization resin is the final stage of the RODI system and will polish your water down to 0 TDS. The DI resin is a mixed bed with a color changing indicator to let you know when it is becoming depleted. The resin starts as a dark blue color that will turn gold when as it becomes exhausted and is a good indicator to let you know when to it should be replaced.
For more info on Color Changing DI Resin – Click Here

 

Need Replacement Filters? 4 Stage Chlorine/VOC Filter Kit

 

BRS RO/DI 4 Stage System Comparison
	BRS 4 Value RO/DI Systems	BRS 4 Value Plus RO/DI Systems
Gallons Per Day	75, 100, 150, or 200	75, 100, 150, or 200
Sediment Filter	Purtrex 5 Micron Depth Sediment Filter	Purtrex 5 Micron Depth Sediment Filter
Carbon Block	BRS VOC 5 Micron Carbon Block	BRS VOC 5 Micron Carbon Block
Membrane	75 or 100 GPD Dow Filmtec Membrane	75 or 100 GPD Dow Filmtec Membrane
Deionization	Single Mixed Bed DI Stage with Refillable Cartridge	Single Mixed Bed DI Stage with Refillable Cartridge
Auto Shut Off Valve	✓	✓
Canister Wrench	✓	✓
Laundry Tub Connection Adapter	✓	✓
Chrome Faucet Diverter Valve	✓	✓
Glycerin Filled Pressure Gauge		✓
Flush Kit		✓
Dual Inline TDS Meter		✓
Dimensions	16″ x 6.25″ x 15.5″	16″ x 7″ x 15.5″

 

4 Stage Value 150 GPD RO/DI System Recommended Conditions:

• Minimum Water Pressure – 65 PSI
• Max Water Pressure – 90 PSI
• Recommended Water Temperature – 77°F
• Recommended Max TDS – <500ppm
• Waste to Product Water Ratio – 1.5:1

Water pressure can be increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI system to produce excessive waste water. Pressure over 90 PSI may cause damage to the RO/DI units filters and components.

 

*DOW Filmtec 75 GPD Membranes have a 96% – 98% typical stabilized salt rejection rate that can be reproduced through the following conditions;

• Source Water Pressure – 50 PSI / Membrane (65 PSI for Water Saver systems)
• Source Water Temperature – 77°F
• Source Water TDS – 250ppm Softened Tap Water
• Recovery – 15%
• Minimum Salt Rejection – 96%

For more info on DOW Filmtec BW60-1812-75 Membrane – Click Here

 

 BRS 4 Stage Value RO/DI System Instructions

 Dow Filmtec Membrane BW60-1812-75